Dynamic Y-Type Lanyard
Standard: EN354 / GB24543-2009
Category: ANCHOR AND POSITION
Dynamic lanyard is used to set a lanyard or anchor point，even used as a connecting point in the fall arrest system. It can absorb a certain amount of impact in an environment where the fall coefficient is less than 1.
Non-adjustable single leg lanyard.
For positioning or shock absorbing.
A protective lanyard is designed to minimize the shock loading.
Bright colors ensure excellent visibility.
Spliced eye on three sides makes it convenient and firm.
PVC protective cover to avoid abrasion.
Different stitch pattern for different lengths.
As a fall arrester, it needs to be used with EN355 shock absorption kit.
- Diameter: 11mm
- Material: Nylon
- Breaking force: 22kN
- Length: 40cm/80cm
- Standard: EN354, GB24543-2009
- Fall arrest
We are pleased to announce the attainment of the EU-Type Examination Certificate for our product, which falls under Personal Protective Equipment (PPE) designed to prevent falls from heights. This certificate, issued by TÜV SÜD Product Service GmbH, verifies compliance with EU Regulation 2016/425, Category III, for PPE.
EU-Type Examination Certificate
No. P5A 076896 0018 Rev. 00
Hold of Certificate: ROPERSNDUSTRY CO.,LTD.
No.1799, DongFu Rd, Haicang Zong
PEOPLE'S REPUBLIC OF CHINA
Product:PPE against fall from a height
Dynamic Mountaineering rope EN 892
Tested according to: EN 892:2012/A1:2016
The Certification Body of TÜV SÜD Product Service GmbH confirms that the listed product fulfils the basic requirements with Annex V (Module B) of Regulation (EU) 2016/425 on personal protective equipment according to Article 19 (PPE of category III). This certificate refers only to the submitted sample for testing and certification and on its technical documentation. See also notes overleaf. The validity of this certificate based on an ongoing surveillance in accordance with Module C2 or D of Regulation (EU) 2016/425 by a Notified Body.